OPW vapor recovery hose

Your position: Home > Clean Energy Fueling Products > OPW Vapor Recovery Accessories

Description

Gas Vapor Recovery Hose

Specification
Fuel Dispenser Hose Rubber Gas Vapor Recovery Hose
Nozzle side with factory assembled cannot be retrofitted because of non-reusable fittings.

Features and Benefits:
*Perfect structure design,easy to assemble.
*Measuring resistance of the thread is below 5Ω at both ends.
*Inside strengthened story of black nitrile butadiene rubber hose.
*No leakage under the pressure of 0.5Mpa at hose joint place.
*Hose joint can bear 2000N tensile force,holding 30s without separation.
*Length:Standard:4.5M/6M
*Acceptent:3.5-10M

Vapour Hose (inside)
Vapour Recovery hose DN8-PN16 (OD≈12mm) of polyurethane (LT-flexible). Resistant to petrol and ozone, low diffusion.
Remains stable also with narrow bending radii, because of the steel reinforcements. With vapour hose tail DN8 of PVDF black
with non-reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

vapor recovery hose for oil fuel filling machine parts Technical Parameters:

Technical Parameters
Model	AGP-11A
Thread Spec	M34*1.5
Operating Temperature	-40°C~+55°C
Working Pressure	less than 0.35Mpa
Net Weight	1.05kg
Name of Parameter	Technical Indicator
Outer Tube ID*OD	19.0mm*30.0mm
Inner Tube ID*OD	10mm*7.5mm
Outer Tube Material	NBR and Chemivic
Inner Tube Material	Nylon
Connecting Thread	M34×1.5
Electrrical Conductivity	≤5Ω
Airtightness	0.5Mpa without leakage
Tensile Test	2000N tensile force,holding 30s without separation
Hose Length	4.5m-10m
Working Temperature	-40~+55℃
Packing method	1pcs/brown box
Size	51051070
N.W(kg)	3.652
G.W(kg)	4.188