Aluminum Husky type Air Diaphragm Pump,Fuel Transfer Pump

Your position: Home > Transfer Pumps & Flowmeters > Fuel Transfer Pump

Description

Pneumatic Diaphragm Pump Advantages:

Idling ,Self-priming , Submerse capability.
Provide stall-free, ice-free zero leak operation.
Epoxy-coated air section for tough environmental conditions.
Low shear force , not easy to damage the material structure.
Bolt joint design provides even sealing pressure for optimal performance
Modular air valve,low pulsation operation,providing smooth and rapid changeover.
No electricity . It's safe and realiable while using in the flammable and explor place .
Diversity of material,no rotating parts,applicable to various erosive situations.
Can pump corrosive , volatile, flammable, poisonous fluids with particles and high viscosity.
Delivery lift and flow can pass the pneumatic valve open to realize the stepless adjustment

1.The pump can suck the peanut, pickles, tomato slurry, red sausage, chocolate, hops and syrup etc.
2. The pump can suck the paint, pigment, glue and adhesive etc.
3. The pump can suck various glazed slurries of tile, porcelain, brick and chinaware etc.
4. The pump can suck various grinding materials, corrosive agent and clean the oil dirt etc.
5. The pump can suck various toxin and flammable or volatility liquid etc.
6. The pump can suck various wedge water, cement slurry and mortar etc.
7. The pump can suck various strong acid, alkali and corrosive liquid etc.
8. It can be used as a front-step tranmission device of the solid and liquid separation equipment.

Mode	Max.Suction Lift (dry\wet,m)	Max. particle diameter (mm)	Suction and discharge size (inch)	Air inlet size (inch)	Max. flow rate (L/min)	Max. air consumption (m³/min)
HY-15/20	4 \ 7.6	2.5	1/2 3/4	1/4	57	0.672
HY-25	4 \ 8	4	1	1/2	157	1.7
HY-40	5 \ 8	5	1½	1/2	358	3.5
HY-50	5 \ 8	6	2	1/2	587	4.9
HY-80	5 \ 8	9.4	3	3/4	1060	9.1

pneumatic positive displacement double diaphragm pumps feature a four bolt joint design, which provides even sealing pressure for leak-free operation and a three-piece manifold for increased installation flexibility. Available in aluminum, polypropylene and stainless steel.

Expanded material offering to handle numerous applications
Flow rates up to 300 gpm (1,135 lpm)
Modular stall-resistant air valve design
Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
Heavy-duty construction
Faster change over with spring loaded pilot valves